| 01 |
Chassis of machine made by 8”X4” I beam size 8.5X3.5’ |
| 02 |
Winch pinion – 2 Pcs [1 Pcs OD- 27” and 1 pcs OD- 6”] |
| 03 |
Clutch cone 1 pcs OD- 20” & Long 8” |
| 04 |
Winch rope drum 1 Pcs. OD- 11” & Long 17”. |
| 05 |
Clutch Hendel thread bush – 1 Pcs OD long 6” (Brass metal) |
| 06 |
Rope drum bush (made by brass metal) |
| 07 |
Bearing block – 4 Pcs |
| 08 |
Block bearing # 6311 – 4Pcs & 6313 – 4Pcs |
| 09 |
Polly Bearing #6308 4Pcs |
| 10 |
Roller Bearing # 6307 – 8Pcs |
| 11 |
Thast Bearing # 51218 – 2 Pcs |
| 12 |
Winch shaft – 2Pcs [1Pcs OD-3.5” and 1-Pcs OD-5”] |
| 13 |
Clipper Pinion OD- 16” [1Pcs] |
| 14 |
Motor 1 Pcs. 25 H.P. 1400 R.P.M.(China) |
| 15 |
Belt Pulley # 2Pcs (1Pcs OD- 22” and 1 Pcs OD-5”) |
| 16 |
B- belt # 3 Pcs 110” long (Korea) |
| 17 |
Bucket 24”X24” square delivery side 13”X13” long 50” |
| 18 |
Bucket sheet 2mm supported by 1.5” Flat bar and Angle |
| 19 |
Bucket Roller plate 12mm [26”X30”] |
| 20 |
Bucket Roller 4 Pcs [OD-6], Stick- 4Pcs. |
| 21 |
Bucket bush- 2Pcs [pin- 2pcs] |
| 22 |
Rope 15mm [Korea] |
| 23 |
Bottom pulley- 1Pcs Top pulley- 1 Pcs [OD- 11”] |
| 24 |
Pulley bush – 4 Pcs & Stick – 2 Pcs |
| 25 |
Tower foundation farm 24”X24” square [made by 4”X2” Chanel] |
| 26 |
Foundation stick – 4Pcs – 1 feet long |
| 27 |
Top plat 24”X24” square[6mm] |
| 28 |
Pinion safety cover – 1Pcs |
